SDR Receiver AtomEl USB

RX up to 55 MHz
ADC 14 bit @ 122.88 MHz
In undersampling up to 500 MHz
Remote operation
Windows 10, Linux, macOS

Description

The SDR Receiver AtomEl USB opens new horizons for HF band enthusiasts, thanks to its 14-bit ADC, which provides a ~110 dB BDR and up to 3 MHz sample rate. A 0.5 ppm local oscillator gives the AtomEl USB a great frequency stability. Using the AtomEl USB remotely, in some rural area will give you the lowest air noise you’ve ever seen while won’t rob you from any comfort or functionality. The AtomEl USB is compatible with popular HAM software such as HDSDR, SDRSharp.

Typical Applications
Direct connection with the laptop
Remote operation
Remote connection with a local transceiver
Spectrum analyzer

Specification

RF ADC, bit @ MHz14 @ 122.88
ADC typeADS4145
RX Frequency range, MHz0.1...55
Undersampling, MHz0.1...500
Independent software receivers1 + 1 SubRX
Sample rate, kHz @ bit48; 96; 192; 384; 768 @ 24
1536; 1920; 2560; 3072 @ 16
Bandscope, MHz-
RX HF filters, MHzLPF: 55
Noise floor, dBm1.9 MHz (160M) - 131
7.1 MHz (40M) - 130
52.5 MHz (6M) - 127
NPR (Noise Power Ratio) with Noise Bandwidth 5 MHz, dB59
BDR on HF, dB110
BDR on VHF, dBn/s
Sensitivity, uV0.35
DR IMD3, not less dB95
RMDR, dB104
ATT/Preamp, dBfrom -31.5 to +6, with 0.5 step
Local oscillator TCXO, MHz +/- ppm122.88 +/- 0.5
Built-in audio codec, bit-
RF input with up to 15 kV ESD protection1 SMA connector
Maximum antenna input voltage, without ADC overload, mV (ATT=0 dB)74 (Pk-Pk); 32.7 (RMS)
PC interfaceUSB 2.0
DC voltage range, V4.5...5.5
Current consumption, A0.41
Power consumption, W2.02
Operating temperature, °C/°F0...+50/ +32...+122