Description
A compact
AtomEl DDC receiver was designed to work on HF
band 0.09 to 60 MHz, for better performance you can add the
internal BPF module (160 10M bands). With the help of
external filters, AtomEl DDC can effectively operate on
frequencies up to 800 MHz. LAN interface allows you to use
the receiver remotely via LAN cable and to connect several
receivers to one PC at the same time, for various projects.
Also, you can hook up the receiver with the Raspberry Pi3 and
use it from any place on the Planet, you just have to have a
reliable internet connection.
Optional BPF-kit board with HF octave band filters. BPF-kit could be installed inside the receiver’s case, with a set of simple manipulation.
160M: 1.73-2.6 MHz
80M: 2.6-4.3 MHz
60M: 4.3-6.5 MHz
40M: 6.5-7.9 MHz
30M: 7.9-13 MHz
20M: 13-15.9 MHz
17-15M: 15.9-21.0 MHz
12-10M: 21.0-30 MHz
ATT- 20 dB
Preamp +10 dB
BPF-kit works either with RX1 or when RX1 and RX2 are on the same band. If RX1 and RX2 are on different bands, then AtomEl DDC Receiver uses LPF. It’s explained by the fact that RX1 and RX2 are software, not physical receivers.
